Bees Boards MA
Take your cocktails and whiskey to the next level with this smoker!
Designed to sit on the top of a variety of glass sizes, allowing the smoke to sink down into your beverage, adding a touch of class and drama - and taste!
Each smoker comes with a tub of hardwood chips (enough to smoke several times!) and three 3/4" pipe screens. Fresh chips and pipe screens can be purchased from Amazon easily!
With a butane torch, lay a few wood chips in the smoker, on the screen. Do not overfill! Fire the torch down into the well for 5-10 seconds, pushing the smoke through and into your drink.
Note: These are made from hardwood wood and finished with food safe, chemical free mineral oil - wood burns! The smoker will become charred and blackened with use, and eventually may need retiring and replacing. As a result, smokers should be considered consumable.
Edge grain boards need a little bit of love and care to give you a lifetime of use – so please follow these guidelines!
- They may feel greasy or oily when they arrive. This is normal! Temperature changes during shipping can melt or firm up the oil and wax, and it’s not uncommon for them to seep. This is why they are wrapped in plastic first. Simply wipe them down with a paper towel.
- Never ever *ever* put them in the dishwasher! Big no no! They will dry out, twist and warp and make us all sad.
- Water is the enemy. If possible, avoid leaving them on wet surfaces or soaking them in the sink. If they get wet, just wipe them off when you’re done – the bees wax will protect it, but you don’t want to let it soak and absorb too much.
- Storing them upright helps prevent water from soaking in and causing twists or warps.
- If they start to look a little dry, or sad, or feel rough – give them a generous coating on all sides of the board oil – let them sit for anywhere between 30 mins and overnight, and buff them with a lint free cloth. This will rehydrate the board, and the wax will give it a water resistant coating. You may want to do this more often in the early days to get them nice and saturated.
None of this is a hard science – they are meant to be used, to be cut on, to be tools in your kitchen or grill and home – but like anything, a little bit of TLC will make them love you forever!
If they ever get so rough from use you want to resurface them, spend some time sanding down to 220 grit – then a liberal dose of board butter or mineral oil to bring the color back – and they will be good as new.
We sell our own custom blend of board butter! You can pick up 4oz right here.